Monday 13 January 2014

Creepy Fingers Doomidrive

Request, with thanks for forum member 'doomidrive' (just to confuse matters :o) for the pictures and information to allow us to do the trace.

A popular effects used by Hendrix and Page amongst others, here's the short but sweet overview:

A faithful reproduction of the vintage Univox Uni-Drive circuit with original NOS transistors and bottom control with some added modern improvements. 






58 comments:

  1. Volume 2 to output :)
    Should be good with BC550 I guess ?

    ReplyDelete
    Replies
    1. Aaarrrgghhh! :o)
      Yes any NPN silicon transistor should be ok, I've read of people using 2 x 2N5089 for Q1 and Q2, and an MPSA18 for Q3 with good results in a Unidrive. It may be worth selecting them with a BCE pinout though to match the layout. The BC184L is mentioned in one datasheet as a replacement product for the 2SC859 which may be a good choice for the pinout.

      Smallbear do sell them though if you want the originals.

      Delete
  2. This comment has been removed by the author.

    ReplyDelete
  3. Ignore my last comment. It's verified!. I had an error that I'd rather not admit to!!..The sun is out here and it distracted me!.. Sounds exactly like the demo.

    Cheers mate!

    ReplyDelete
    Replies
    1. Excellent, nice one matey :o)

      Delete
    2. I used 2 x 2N5089's (Q1 &2) and an MPSA18 for Q3. I used that combo in the Uni'Drive that I built but this has about 10 times the amount of drive than the UniDrive.

      Delete
  4. Incidentally, what sort of differences in sound does the trimmer give you? In the original that was a fixed 8K2 resistor

    ReplyDelete
    Replies
    1. On further testing there is a very early note decay no matter how the trimmer is set. The trimmer doesn't seen to affect the sound much, just brings the sound in but doesn't seem to bias anything (in my build anyway). Maybe this needs a bit of fiddling with different transistors.

      Delete
  5. Doomidrive here. Sorry I didn't get back to you sooner.

    The pot values are:
    Volume - A10K
    Bottom - B250K
    Drive - B100K

    ReplyDelete
    Replies
    1. Excellent cheers. For anyone who has already built it or started building it I think the Bottom will work fine with a 100K because it's just used as a blend between the two input caps and so it isn't hugely important, as long as it is "enough" or more. But I'll change it on the layout so that it's accurate.

      Delete
  6. I drew up my own vero and built my Uni-drive last year using NOS OEM transistors. it doesn't have anywhere near as much fuzz/distortion as the Creepy Fingers version. the stock one is more of a clean/dirty boost, but that CF version does sound very good in the clip.

    ReplyDelete
  7. just finished building this one and I like it a lot more than the original. I used NOS SC859's in it. the trimmer adjusts the amount of final gain and I like mine set to the maximum.
    the only difference that I made was to add a 1K resistor from Drive 1 to ground instead of directly to ground so it wouldn't completely kill the signal when it was fully CCW.

    ReplyDelete
  8. Oh boy. I've been waiting for a Unidrive or variant to pop up here for a long time! I don't think it could get better than the doomidrive!

    So I'm excited to build this one, but I have some reservations because I always feel weird copying the really cool small builders

    ReplyDelete
    Replies
    1. DIY is DIY mate, I wouldn't have any reservations. Just don't build 10 and sell 9 :o)

      Delete
  9. I nearly bought one of these, but thought I'd go for the Creepy Face instead.
    This is defo my next build.
    I really need to buy some houses for these circuits.

    ReplyDelete
  10. Turns out that I've got everything I need to build one of these on hand! Well no 2SC859 but plenty of alternatives. I think I'll order some from smallbear just for fun

    ReplyDelete
  11. Thanks! This'll be a fun one! IVIark, sorry for the random off-topic question, I just build a dual OD of a Timmy+3-knob red snapper, and both sides sound great, but with both engaged and even with both gains rolled back there is a high-pitched whine, it's not un-useable, just annoying. Both sides sound really awesome, but I'd like to use both together without having to roll the gains way back. Any way around this? (Red snapper is first in the chain, I sed a Tayda KIA4558

    ReplyDelete
    Replies
    1. Try a low value (maybe 47R to 100R) resistor in series with the supply to both effects and the same low value in series with the input.

      Delete
  12. *and a LM1458 for the Timmy. Is this an IC problem, or just too much gain & output? Anyone have any solutions? Thanks in advance!!

    ReplyDelete
  13. Sorry for the dual posts, my phone is being stupid!

    ReplyDelete
  14. Hi Mark,
    Haven't built this yet.
    From your schematics Bottom 3 goes to the negative side of 10uF.
    Is that a mistake?
    Thanks

    ReplyDelete
    Replies
    1. No it's a Bottom control so the bass increases when you turn it up.

      Delete
  15. Sorry, Mark
    I must be a bit slow.
    Bottom 3 goes to the negative or positive side then?
    Thanks again for your quick reply.

    ReplyDelete
    Replies
    1. Sorry Alex, I just noticed the layout. I knew I wanted it to go to the negative side but for some reason didn't. So yes the input goes to negative, thanks for the heads up I'll alter the layout.

      Delete
    2. Incidentally Vince, I know yours worked but definitely swap that round, it may solve that early gating you were having.

      Delete
  16. Thanks! I'll try that and report back. Do I need one to both effects' inputs? (Or the input to the jack?)

    ReplyDelete
  17. This comment has been removed by the author.

    ReplyDelete
  18. Hi Metalman,
    Forget my answer!
    I thought you were talking about another pedal.

    ReplyDelete
  19. Haha no prob! Did you see my previous posts? It was a question about a dual OD build, a Timmy + a 3-knob red snapper OD

    ReplyDelete
  20. I just hooked this up to my test rig and it sounds sweet, lots of gain. The trimmer doesn't do much. I used 2x 2N5088 and an MPSA13 But I am getting some high pitched oscillation, any idea how to fix it?

    ReplyDelete
    Replies
    1. It's the nature of the beast with some gainy circuits, many of them are noisy for me when I breadboard. The noise should disappear when the circuit is boxed.

      Delete
    2. Having the same thing... did you box it, and did that solve it?

      Delete
  21. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Exactly what is the trimmer's intended function?
      It appears to me to be some sort of feedback loop(?)

      Delete
  22. Welp, I finished boxing this one up and it's kinda too late to crank it but seems to sound great

    http://i825.photobucket.com/albums/zz176/Dub-T-123/Mobile%20Uploads/photo_zpsc8404b2f.jpg

    I didn't have a 47k trimmer, so I just fixed it at 47k. Transistors are 2SC828.

    I'm excited to play around with this pedal more tomorrow

    ReplyDelete
  23. And the money maker

    http://i825.photobucket.com/albums/zz176/Dub-T-123/Mobile%20Uploads/photo_zpse7e43a56.jpg

    This pedal is awesome! Super loud, low end is really tight throughout the whole range of the bottom control, and its super crunchy and clear with chords

    This will be the perfect addition to my board for an upcoming project. Thanks for the effort you guys put in making this layout!

    ReplyDelete
  24. simple distortion...without the weight / bass demo

    ReplyDelete
  25. How might i go about adding a mid control? I'm building for my friend and he seems paticularly adamant about it. btw, haven't begun yet, just don't want to disappoint seeing as we'd have to pay shipping back and forth between the US and Sweden if he didn't care for it without! :/ Is it possible or nonsensical?

    ReplyDelete
  26. i think im just going as is. the bottom control seems to have great range through frequencies, not just those in which it implies. haha. perhaps this is why i was neglected the answer to my question. thanks for posting this one. super useful circuit.

    ReplyDelete
  27. Hi there, I'm looking for some advice on this build.
    This my second attempt at building a Unidrive. The first was on I breadboarded, but it sounded awful.
    So I decided to build this one.
    I am pretty much a novice when it comes to building pedals, with just a woolly mammoth clone under my belt.
    I have built this pedal but cant get it to work, other than on bypass. No hiss, led or anything when switched to the effect. I suspect that my final wiring may be the problem. I have tried to wire up a power supply jack to the positive track and the ground track and a true bypass switching like so, http://img716.imageshack.us/img716/8838/3pdtledwiring.png, omitting the led connections.
    Effect output going to volume 2, Effect input going to drive 3, Jack output to output jack tip, Jack input to input jack tip, Ground to input jack ring, wired the rings together and to the negative/ground track on the board, Led negative to the negative/ground track.
    I'm at a loss to what I have done wrong, or what the problem may be.
    Can anyone help me out?

    ReplyDelete
    Replies
    1. I usually use this offboard wiring (Actually its the same than the yours, but more complete), http://www.madbeanpedals.com/tutorials/downloads/StandardWiring_MBP.pdf


      Delete
  28. The riff starting at 0:39 is that by The Endless Blockade (1st song from Turning Illness...)?

    ReplyDelete
  29. Tried to read what I could but has anyone asked what a 2sc945 would be like in here? Only ask cos Tayda has them by the bucket load but imagine they're not gonna cut it.

    ReplyDelete
    Replies
    1. I've got some 2SC945's basically because they were so cheap but have never tried them in this. Certainly worth a try though at the price they can be found

      Delete
    2. Thanks Mark. Sounds like it might be worth a shot for the $$$.

      Delete
    3. Man they ar CHEEEEAAAAPPP. I did some looking for pedals that use them and I came up with two. One - boss ce-3, and the second was someone that used them in a Kay fuzztone clone. So they might be good in a bunch of different effects. I would definitely give them a try.

      Delete
    4. They're worth getting in just for BCE pinout for when they are required and using 2N5088 or similar would be a pain

      Delete
    5. Hmmm. According to the datasheet from tayda they're EBC. So I wonder if it's just the Fairchild ones they sell or if they come in different pinouts, or if the datasheet is wrong.

      Delete
    6. Never mind. Im an idiot. They're listed as ECB, so if you turn them around they are BCE, and I miss typed it as EBC.

      Delete
    7. Ok built this using 2N5089s in Q1 and Q2 and MPSA18 in Q3 (had to twist legs) and fuck me its loud, but its also really good. Worth a build if you like em loud.

      Delete
  30. In case anyone is interested - just built this with BC184Ls, as i had some. Nice crunchy OD, perhaps a little brittle in the high end. The trimmer works well in mine - but unlike John Kallas I like to keep it just below 1/2 way. Still plenty of gain but it keeps the lows tight. Above that the highs get a bit of a crackle and the bass gets too loose. It's probably because of the different trannies.

    FWIW I also tried an MPSA18 in Q3 but it just made it sound a little bit thinner.

    ReplyDelete
  31. built this, with 5089s/A18, and swap trimmer to 47k,got very loud when vol-pot at 30%, and it chok when vol past 50%, had to trim down the 47k resis, anyway 20-30% that heavy lowend drive is enough to me, gald to built this board, and thank you so much for the layout.. here share my board: http://i1244.photobucket.com/albums/gg569/pakkee66/DIY%20PEDAL/Creepy%20Fingers%20Doomidrive%20CB_zps48fbueix.jpg

    ReplyDelete
  32. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. btw, if you're looking for an easy to find tran with the "correct" pinout I can confirm that 2sc945 does a decent job. If you have several, it's worth your time to sort through and find 3 on the lower side of the hfe range.

      Delete